Operation Manual

Steering wheel lock (if so equipped)
5-58 Features and controls
5
N00512501222
[For vehicles equipped with the Free-hand
Advanced Security Transmitter (F.A.S.T.-
key).]
For information on operations for vehicles
equipped with the Free-hand Advanced Secu-
rity Transmitter (F.A.S.T.-key), refer to
“Free-hand Advanced Security Transmitter
(F.A.S.T.-key): Steering wheel lock” on
page5-22
[Except for vehicles equipped with the
Free-hand Advanced Security Transmit-
ter (F.A.S.T.-key).] (Vehicles with steering
lock system)
Remove the key at the “LOCK” position.
Turn the steering wheel until it is locked.
Turn the key to the “ACC” position while
moving the steering wheel slightly.
N00512601799
[For vehicles equipped with the Free-hand
Advanced Security Transmitter (F.A.S.T.-
key).]
For information on operation for vehicles
equipped with the Free-hand Advanced Secu-
rity Transmitter (F.A.S.T.-key), refer to
NOTE
 The key cannot be removed unless the selec-
tor lever is set to the “P” (PARK) position,
which allows the ignition switch to turn to
the “LOCK” position.
CAUTION
 If the engine is stopped while driving, the
power brake booster will stop functioning
and greater effort for braking will be
required. Also, the power steering system
will not function and it will require greater
effort to manually steer the vehicle.
 Do not leave the key in the “ON” position for
a long time when the engine is not running.
This will cause the battery to run down.
 Do not turn the key to the “START” position
when the engine is running. It will damage
the starter motor.
Steering wheel lock (if so
equipped)
To l ock
To u nlo ck
CAUTION
 Remove the key when leaving the vehicle.
NOTE
 If the front wheels are turned, the anti-theft
lock may sometimes make it difficult to turn
the key from “LOCK” to “ACC”. Firmly
turn the steering wheel to the left or to the
right as you turn the key.
Starting the engine
BK0200500US.book 58 ページ ２０１３年２月１２日 火曜日 午前９時４６分