Operation Manual

Theft-alarm system
5-44 Features and controls
5
1. Open the lid (A) inside of the liftgate.
2. Move the lever (B) to open the liftgate.
3. Push out on the liftgate to open it.
N00510201267
The theft-alarm system is designed to provide
protection from unauthorized entry into the
vehicle. This system is operated in three
stages: the first is the “armed” stage, the sec-
ond is the “alarm” stage, and third is the “dis-
armed” stage. If triggered, the system
provides both audible and visual alarm sig-
nals.
N00510301200
Park the vehicle and stop the engine. Arm the
system as described below.
1. Except for vehicles equipped with the
F.A.S.T.-key, remove the key from the
ignition switch.
For vehicles equipped with the F.A.S.T.-
key, put the operation mode in OFF.
2. Make sure that the engine hood is closed.
To open
Liftgate Power liftgate
CAUTION
 Always keep the release lever lid on the lift-
gate closed when driving so that your lug-
gage cannot accidentally bump the lever and
open the liftgate.
Theft-alarm system
CAUTION
 Do not modify or add parts to the theft-alarm
system. Doing so could cause the theft-alarm
to malfunction.
Armed stage
BK0200500US.book 44 ページ ２０１３年２月１２日 火曜日 午前９時４６分