Operation Manual

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Features and controls 5-29
5
The horn and turn signal lights of the keyless
entry system answerback function can be
changed as required. This is done with the
key removed from the ignition switch.
The answerback function can be set in the
following three ways.
1. Put the operation mode in OFF.
2. Open the driver’s door and turn the com-
bination headlights and dimmer switch to
the “OFF” position.
3. Press the LOCK button (1) for 4 to 10 sec-
onds and press the UNLOCK button (2)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 10 seconds of
pressing the UNLOCK button in step 3.
The answerback function from the turn signal
lights can be turned ON or OFF separately.
1. Put the operation mode in OFF.
2. Open the driver’s door and turn the com-
bination headlights and dimmer switch to
the “OFF” position.
3. Press the UNLOCK button (2) for 4 to 10
seconds and press the LOCK button (1)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 10 seconds of
pressing the LOCK button in step 3.
The buzzer answerback function can be
turned ON or OFF as required.
NOTE
 On a vehicle equipped with a Mitsubishi
Multi-Communication System, the functions
can be adjusted on the screen. For details,
refer to the separate operation manual.
 The door and liftgate unlock function can be
set so that all doors and liftgate unlock when
the UNLOCK button (2) is pressed once.
Refer to “Setting of door and liftgate unlock
function” on page 5-30.
Answerback function
Horn deactivation/reactivation
One chime: The horn will not sound.
Two chimes: The horn will sound.
Four chimes: The horn will sound if the
LOCK button is pressed twice
within 1 second.
NOTE
 On a vehicle equipped with a Mitsubishi
Multi-Communication System, the functions
can be adjusted on the screen. For details,
refer to the separate operation manual.
Turn signal light deactivation/reactiva-
tion
Number of
chimes
To l ock To u nlo ck
One chime One flash Two flashes
Two chimes One flash No flash
Three chimes No flash Two flashes
Four chimes Two flashes One flash
Five chimes No flash One flash
Six chimes Two flashes No flash
Seven chimes No flash No flash
NOTE
 On a vehicle equipped with a Mitsubishi
Multi-Communication System, the functions
can be adjusted on the screen. For details,
refer to the separate operation manual.
Buzzer deactivation/reactivation
BK0200500US.book 29 ページ ２０１３年２月１２日 火曜日 午前９時４６分