Operation Manual

7-66
Vehicle care and maintenance
7
2. Turn the socket and bulb assembly counterclockwise to
remove it.
N
OTE
● The tail and stop light uses an LED instead of the bulb.
Check with an authorized Mitsubishi Motors dealer or a
repair facility of your choice when the light needs to be
repaired or replaced.
3. Pull the bulb out of the socket.
B- Tail and stop light (LED) - cannot be replaced
C- Rear turn-signal light
BK0150600US.book 66 ページ ２０１２年３月３０日 金曜日 午前１０時４３分