Operation Manual

Features and controls
3-207
3
● There is a fault in the Active stability
control (ASC).
● Contact an authorized Mitsubishi
Motors dealer or a repair facility of
your choice to have the system
checked.
Refer to “Active stability control
(ASC)” on page 3-138.
● There is a fault in the Hill start assist. ● Have the vehicle checked at an autho-
rized Mitsubishi Motors dealer or a
repair facility of your choice.
Refer to “Hill start assist” on page 3-
131.
● There is a fault in the electronically
controlled 4WD system.
● Contact an authorized Mitsubishi
Motors dealer or a repair facility of
your choice to have the system
checked.
Refer to “Electronically controlled
4WD system” on page 3-115.
● There is a fault in the automatic tran-
saxle or CVT.
● Contact an authorized Mitsubishi
Motors dealer or a repair facility of
your choice to have the system
checked.
Refer to “Automatic transaxle” on
page 3-95.
Refer to “Continuously variable trans-
mission (CVT)” on page 3-105.
● The electronically controlled 4WD sys-
tem is hot.
Refer to “Electronically controlled 4WD
system” on page 3-115.
Screen type 1 Screen type 2 Cause Do this (Reference)
BK0150600US.book 207 ページ ２０１２年３月３０日 金曜日 午前１０時４３分