Operation Manual

Features and controls

3-41

3. Insert the emergency key into the ignition switch.

4. Insert the F.A.S.T.-key into the emergency key.

5. Press and hold the brake pedal down with your right foot.

6. Make sure the selector lever is in the “P” (PARK) posi-

tion.

7. Turn the emergency key with the F.A.S.T.-key to the

“ON” position and make certain that all warning lights

and warning displays are functioning properly before

starting the engine.

8. Turn the emergency key with the F.A.S.T.-key to the

“START” position without pressing the accelerator pedal.

Release the emergency key with the F.A.S.T.-key when

the engine starts.

9. Remove the F.A.S.T.-key from the emergency key.

WARNING

● Make sure to remove the F.A.S.T.-key from the

emergency key after the engine is started.

If not removed, the F.A.S.T.-key could fall to the

floor, which could disturb the pedal operation.

BK0150600US.book 41 ページ２０１２年３月３０日　金曜日　午前１０時４３分