Instruction manual

96
In order to activate it, an internal parameter must be changed. Follow the next steps :
1 – Stop NHClient
2 – Open the file NHIPClient.exe.config by using any text editor. This file is saved in the
NH installation folder
3 – Change the value of the parameter “AutoLogOffEnabled” to “True”
4 – Set the period of inactivity (minutes) in the parameter “AutoLogOffTimeout”
5 – Close and save the file NHIPClient.exe.config
6 – Start NHClient
IMPORTANT NOTE
While playback is being performed ,the auto log-off window will not be shown.