Instruction manual

Instruction manual 77
SystemShutdown (SYS-02)
System event
Information about the system.
SystemStart (SYS-03)
System event
Information about the system.
SystemStop (SYS-04)
System event
Information about the system.
SystemSettingsChanged (SYS-05)
System event
Name of the configuration parameter and its new value.
CameraAdded (CAM-01)
Camera event
IP address and port of the NVVR that performed this action.
CameraRemoved (CAM-02)
Camera event
IP address and port of the NVVR that performed this action.
CameraSettingsChanged (CAM-03)
Camera event
Name of the configuration parameter and its new value.
CameraConnected (CAM-04)
Camera event
CameraDisconnected (CAM-05)
Camera event
Cause of disconnection.
CameraReplaced (CAM-06)
Camera event
IP address and port of the NVVR client that performed this action.
ErrorDiskLimitReached (ERR-01)
Error event
ErrorNetworkConnectionLost (ERR-02)
Error event
Identifier of the device or URI whose connection.
ErrorDiskAccessFailed (ERR-03)
Error event
Path of the file that failed to access the disk.
ErrorWrongMacAddress (ERR-04)
Error event
Found and expected MAC addresses.
ErrorNetworkConnectionOverflow (ERR-05)
Error event
Information about the connection that overflowed.
ErrorDiskFull (ERR-06)
Error event
Path to the file that failed to access the disk.
ErrorRecordingQueueOverflow (ERR-07)
Error event
Information about memory usage and limits.
The following errors don’t trigger any event.
Message
Type
Description
Client not connected to server
Error NVVR
The Nethunter Server is not connected to NVVR device. It can be caused
due to:
- The server is down.
- There has been a connection problem.
This camera is not reachable in the network
using specified parameters. Please check IP
address and port or check camera network
connection if error persists.
Error NVVR
It can be caused due to:
- The operation has timed out.
- A mistake entering the IP or port of the camera.
- The camera is not reachable from the NVVR through the
network.
Wrong login.
Please check user and password.
Error NVVR
User name and/or password assigned when creating a new NVVR were not
correct.
Device is not reachable in network using
specified parameters. Please check IP address
and port or check device network connection if
error persists.
Error NVVR
The connection to remote NVVR device was closed.
Error updating camera settings.
Error NVVR
The settings could not be updated in the NVVR or in a camera for any
reason.
This camera has schedules configured. Please
delete them first.
Error NVVR
The action could not be taken because the camera has schedules
configured.
If a camera needs to be deleted, the schedules and alarms must be deleted
first.
This camera has rules configured. Please
delete them first.
Error NVVR
The operation could not be taken because the camera has alarms
configured.
If a camera needs to be deleted, the schedules and alarms must be deleted
first.
Maximum third party camera licenses reached.
Until license upgrade, you can add this camera
only for live pourpose.
Error NVVR
The Third Party license does not allow the action that is trying to be done.
The camera is not reachable in the network.
Error NVVR
Ping to the camera failed. Camera is not reachable in the network.
The NVVR has to be able to ping the Camera.
Impossible connect to camera video channel.
Error NVVR
Connecting to the video stream of the camera failed.