Instruction manual

68
3.10.9 Users’ permissions for devices
Administrators can grant or deny access to devices according to the logged user.
In order to proceed, select the device on the left tree and check/uncheck the users to grant/deny them access.
Optionally, if a recorder was selected, permissions can be propagated to all the cameras in the recorder or to all
the devices in the system. Finally, click on the button “Save changes.”
Denying access to a device (camera or recorder) has different consequences according to where it is applied :
Devices tree
Cameras and recorders : They are not shown if the logged user has not permission for them.
Maps : They are not shown if the logged user has not permissions for all the cameras attached
to them.
Monitor
Only the granted devices to the logged user are shown.
Live
Only the granted cameras to the logged user are shown on the Views.
Schedule
Synchronization tasks : They are not started if the logged user has not permission for the
recorder to be synchronized.
Download tasks : They are not started if the logged user has not permission for all the cameras
included on it. Moreover, when a recorder is dragged&dropped, only its granted cameras to the
logged user are included in the download.
Downloads
They are not shown if the logged user has not permissions for all the cameras included on it.
Events
Only the granted cameras to the logged user are shown on the events.
Settings
Devices tree
Users’ list
Propagate
permissions
Save the changes