Instruction manual

64
the fields to fill when we creating a NV100E device are shown in the table below :
Field
Description
STEP 1
IP address
Neither type the new NV100E IP address without spaces nor left side zeros. (correct:
192.168.0.10, incorrect: 192.168.000.010)
Name
Name of the NV100E
Disabled
Check this option to disable the NV100E.
Port
Type your NV100E port. By default it is 80 for all NV100E. Do not change this parameter unless
your distributor tells you to do so.
User
NV100E administrator username. Do not change this parameter unless your distributor tells you
to do so.
Password
NV100E administrator password. Do not change this parameter unless your distributor tells you
to do so.
STEP 2
Check status interval
Select the time interval between status check (6-99 sec.). By default 6.
Configured Cameras
List with cameras configured in the NV100E.
Option “Configure NV100
cameras”
A window where users can manage the IP cameras recording on that NV100 is shown
In order to add/remove/configure the cameras of the NVVR, click on the button “Configure NVVR cameras”.
The available functionalities are:
 IP cameras with live proxy enabled auto-discovery.
 Unassign IP cameras already assigned to this NV100E.
 Change IP camera internal settings (Codec, network parameters, etc.) using its web access.
Cameras list
Camera Web access
Show new cameras option
Channel selected for the camera
Video stream selected
for the camera