Instruction manual

60
The second step is started when users click on the button “Next” on the first step. The following screen is shown.
The following parameters have to be filled in.
Field
Description
Check status interval
Select the time interval between status check (3-99 sec.). By default 3.
Live Bandwidth (kbps)
Maximum output live bandwidth allowed between the NVVR and the
NHServer. This value can be configured for each NHServer connected to
the NVVR. By default 0 (unlimited).
Playback Bandwidth
(Kbps)
Maximum output playback bandwidth allowed between the NVVR and the
NHServer. This value can be configured for each NHServer connected to
the NVVR. This setting also applies to downloads. By default 0 (unlimited).
Configured Cameras
List with cameras configured in the NVVR.
Option “Configure
NVVR cameras”
A window where users can manage the IP cameras recording on that NVVR
is shown
In order to add/remove/configure the cameras of the NVVR, click on the button “Configure NVVR cameras”.
The following screenshot shows the window where all IP cameras are managed. The available functionalities are:
 IP cameras auto-discovery.
 IP cameras manual addition.
 IP cameras deletion.
 Modify IP cameras settings (Name, User, Password, Icon, etc.).
 Change IP camera IP Address.
 Change IP camera internal settings (Codec, network parameters, etc.) using its web access.