Instruction manual

Instruction manual 59
3.10.6.2.2 Nethunter Recorder (NVVR) + IP Cameras
Users can discover NVVRs on the network or fill in the connection data manually.
By pressing the button “Discover”, the system automatically discovers the available NVVR devices in the
network. In the following screen there’s an example with some NVVRs found in the same network.
In order to add a NVVR, click on it and then press “Select”.
Alternatively, users can fill the NVVR connection data manually.
Users have to fill in all the device parameters. It is divided into two steps. In the first one, the following
parameters have to be filled in.
Field
Description
IP address
Neither type the new NVVR IP address without spaces nor left side zeros.
(correct: 192.168.0.10, incorrect: 192.168.000.010)
Name
Name of the NVVR
Disabled
Check this option to disable the NVVR and all cameras IP temporarily.
Port
Type your NVVR port. By default it is 37000 for all NVVR. Do not change
this parameter unless your distributor tells you to do so.
User
NVVR administrator username. Do not change this parameter unless your
distributor tells you to do so.
Password
NVVR administrator password. Do not change this parameter unless your
distributor tells you to do so.
Discover window
Discovered NVVR
information
Discover option (select to
show “Discover window”)