Instruction manual

58
3.10.6.2.1 DVR
Some of the configuration parameters may differ between DVR models. Please, check the DVR users guide to
clarify any parameter question or functionality behavior.
Field
Description
STEP1
IP address
Neither type the new device IP address without spaces nor left side zeros.
(correct: 192.168.0.10, incorrect: 192.168.000.010)
Name
Camera descriptive name (up to 50 characters maximum)
Disabled
Check this option to disable the camera temporarily.
Port
Type your DVR port. By default it is 53705 for all Mitsubishi DVRs.
User
DVR administrator username. Do not change this parameter unless your
distributor tells you to do so.
Password
DVR administrator password. Do not change this parameter unless your
distributor tells you to do so.
STEP2
Check status interval
Seconds between status checks (from one to 99 seconds). By default three.
Live quality
DVR output image quality for Live operations (Super, High, Standard, Basic,
Low). Depending on the DVR quality, the decompression operations will
require more CPU usage on the client side. DVR output bandwidth is not
affected.
Not available for MPEG-4 models.
Play quality
DVR output image quality for Play operations (Super, High, Standard, Basic,
Low). Depending on the DVR quality, the decompression operations will
require more CPU usage on the client side. DVR output bandwidth is not
affected.
Not available for MPEG-4 models.
Cameras
List of available DVR cameras. Depends on DVR model.
All the DVR cameras are automatically named with a sequential number.
Change them to match them with your needs.
Icon
It is possible to change each camera icon. This icon will be displayed in the
explorer and another Nethunter controls.
PTZ
Check this box only for analog PTZ cameras. This option will enable the PTZ
control in the live view and in the Monitor screen.
Hint: do not use this option for non-PTZ cameras to minimize system
resources (DVR ports, memory…)