Instruction manual

54
3.10.3 Splits
Nethunter comes with a complete set of split layouts available to use in live or playback screens, but it is also
possible to modify the existing ones or create new ones depending on operator needs.
The right panel is a splits editor where you “drag & drop” split cells of different sizes.
To create a new split , click on “New” ,provide a name and choose one of the existing layouts.
The aspect ratios currently available are: 4:3 and 16:9 with the following combinations:
4:3 aspect ratio: 3x3, 4x4, 5x5, 6x6 cells matrix
16:9 aspect ratio: 2x3, 3x4, 4x5, 5x6 cells matrix
At this point, it is possible to define the cells content through the controls below. Just click on a split cell size and
fill the blank matrix with the combinations that you want.
Over the matrix, in blue color is selected the combination that will be applied when you “click” with your mouse.
It is not allowed to overlap already setup cells.
The splits configuration is applied at Server level. All the connected clients will have the same splits combinations
available.