Instruction manual

46
Export
Exporting data will generate a comma separated values file with “csv” extension including all the events filtered
on the screen. This file could be imported into multiple applications, including Microsoft® Excel.
The exported file includes all the events information plus the related metadata.
Get events
Due to the fact that the events are stored on each recorder device, first of all you have to retrieve the events on
demand each time you want to check what’s happening for specific devices or the complete system.
This operation will retrieve the events for the selected devices on the explorer tree filter. You can select to
synchronize events from just one device, and you can choose to retrieve events from any section or the full
installation, by selecting an explorer tree folder.
When selecting one event from the events list, a panel is shown in the bottom of the screen. The new panel
displays important information of the event. This panel can be resized vertically in order to increase the playback
control. It can also be resized horizontally by dragging the bar on the left of it.
It’s also possible to read the metadata linked to the event (only available on NVVR events) by cliking on the
corresponding button.
Only a few events allow to playback recorded video. In those cases, the camera will be listed in the “Event
recorded cameras” section. These events depend on the type of device :
NVVR
- AlarmRuleON
- AlarmRuleOFF
- RecordingStartExternal
- RecordingStopExternal
- RecordingStartManual
- RecordingStopManual
- RecordingStartSchedule
- RecordingStopSchedule
- RecordingModeChangedExternal
WARNING
This operation might take some minutes depending on the amount of selected devices. Also it will affect the devices performance during
synchronization time. In certain DVR models, clients could stop receiving video while events are being requested.