Instruction manual

Instruction manual 43
3.8.2 Nethunter exports viewer
Once a video is exported, a small application
called “Viewer.exe” will also be recorded on
the destination device.
This application will show the export name and
description, the exported period, and a list of
all the exported cameras with its corresponding
recorded video information (date, time and
camera name).
On the other hand, this is the utility that will allow you to check whether the exported video was modified or
not. If the video was exported with a password, type it and click on the “Check Hashes” button to validate each
camera video. If it was exported without password just press the check button. Behind each camera video you
will see the validation result.
To view a camera video, just click on the camera name and the media player will start playing the video.
The playback controls will depend 100% on the capabilities of your media player.
3.8.3 Native format downloads
This kind of downloads is only available for dvr cameras. The downloads will be saved in the raw native format
of the dvr. Each dvr has a different type of format and player for watching it. Users can schedule downloads
from several cameras and watch them at the same time.
NOTE
After clicking on any native format download for watching it, a preprocessing task is executed. This task might take some minutes depending on
the size of it. Please, be patient. That’s why it’s recommendable to split big native format downloads into some small ones.
NOTE
If there are some cameras in the scheduled download and any of them doesn’t have recordings in that period, the download might fail. If so,
schedule it again by removing that camera.