Instruction manual

38
3.7.3 Scheduled tasks list content
On the right hand there is a list of scheduled tasks. Each task has an entry on that list showing its main execution
parameters and status.
The schedule possible statuses are the following ones:
 ”Stopped”: means that it is not yet executed (for the first time) or that it will be re-executed again since it
is a periodical execution. Check the “Next execution” date to know when it will be executed for the next
time.
 “Running”: means that the task is being executed at this time.
 “Finished”: means that the download has been executed and finished. It will disappear from the screen
immediately (unless the filter “All” is applied) and it will appear in Downloads screen.
 “Trying”: means that Nethunter is trying to request for the images.
To filter the scheduled tasks list there is drop-down list filter with two possible values:
 “Pending”: Tasks that will be executed one or repeatedly.
 “All”: Tasks including the completed ones that will not be executed anymore.
To check a schedule task detail you can “double-click” it and below will appear all the scheduling details. It is read-
only panel once the schedule is created.
To delete a schedule task from the system, right-click on the task and select the option “Delete”.
3.7.4 The time scheduling component
When a new schedule is created, a new screen area is enabled, allowing the user to configure a schedule with the
following information:
1. Choose the execution type (single or multiple) and choose the date or week days and the time that the
execution will take place.
2. Assign a task name to identify the task on the tasks list.
3. “Drag & drop” the DVR devices that you want them to be synchronized, from the left side devices explorer tree.
You can drop multiple DVR devices from different models. All of them will be included in this time synchronization
task.
4. (Optional) Type a description for your scheduled task in the comments field.
5. Press the “Save” button.