Instruction manual
Instruction manual 29
Maps are user’s images that must be set up from the settings screens. The supported image files are: BMP, GIF,
JPEG, PNG, TIFF, WMF and RLE.
A map is placed in the folder that is selected in the moment of creating a map.
It’s necessary to click on the map to use it in the Live screen.
A map can be resized, zoomed-in and out, or adjusted to fit the screen. The map area can be resized or closed by
the user.
There is a possibility to have links (navigation areas) to other maps into a displayed map. These areas could be
selected and the new map will be loaded. When moving the mouse over a link area (navigation), it will change to
a different color and the name of the destination linked map will be shown on it.
To close the map, just click the “X” icon top right corner or the map component sub-window.
3.5.4 Sequences
It’s possible to watch different Views sequentially by pressing the button “Views sequence”.
A sequence will start iterations through the available views with the specified sequence time (in seconds).
To configure a sequence, it’s necessary to create more than one View and set an interval time in the range of 2-
99 seconds.
3.5.5 Digital zoom
It’s possible to perform digital zoom on Live images. Firstly, click on the area you want to zoom. After that, zoom
in by moving the mouse scroll wheel ahead and zoom out by moving it back. Move the zoomed images in
whatever direction by holding the third button of the mouse clicked, moving the mouse and releasing the
button.
3.5.6 Live audio streaming
Users can stream or listen live audio to/from any UDPTech device. For streaming audio, the standard PC audio
input is used. For listening audio, some PC speakers are needed. Check that your PC audio settings are properly
configured.
In order to open the speech channel, users must select the option “Talk to camera” in the Live context menu.
When the speech is finished, the “Stop talk” option must be selected.
Maps navigation zone (link)
Cameras