Instruction manual

24
3.4 System monitor
Currently-connected devices are listed showing their status. From this view, the system connectivity health is
immediately displayed and monitored.
When a device is disconnected, the status text will be displayed in red text to make it easier to be identified.
The devices list is filtered by the left explorer hierarchy tree. After selecting a branch, the right side devices will
be immediately filtered.
Through the “Incidences” checkbox it is possible to filter devices with connectivity errors, not licensed or disk
full. In those cases, the status is displayed in red color.
All columns allow descending or ascending sorting by clicking on them.
Live Device: This is the name of the live device that contains a specific camera.
Playback Device: This is the name of the recorder device that contains a specific camera. If an IP camera is not
configured to be recorded into any IP recorder device, this field won’t be available.
Name: Qualified device name which is defined by the operator when setting up the system.
Location: Virtual path from the selected Explorer tree node to the camera virtual position on the explorer tree.
The first path position is displayed at the top of the devices list.
Live status: Shows the current live status. The meaning of this field is different according to the device. See the
table below.
NVR
NVVR
DVR
IP camera
Analog camera
n/a
Connected or Disconnected
Status of the device *
Connected or
Disconnected.
The same status as the DVR which it
belongs to.
* Check out the manual of your devices to know the possible status values
Play status: Shows the current play status. The meaning of this field is different according to the device. See the
table below.
NVR
NVVR
DVR
IP camera
Analog camera
Status of the
device *
Connected or
Disconnected
Status of the
device *
The same status as the NVR or
NVVR which it belongs to.
The same status as the DVR which
it belongs to.
* Check out the manual of your devices to know the possible status values.
Recording: Icon indicator for recording status of the device. When the icon is in red color means that the device
is being recorded.
Some devices (DVR) are not able to notify individually the cameras that actually recording. In this case the
recording icon appears in orange; since it is not sure that the camera is being recorded (depends on DVR
settings).