Instruction manual

Instruction manual 15
Network considerations:
Nethunter is composed by different components that can run in different computers.
You can refer to the following table to see which connectivity options you have for your network configuration,
and which ones will be the recommended scenarios on your network.
LAN & good Network
connections
ADSL & low bandwidth
network connections
Unstable environment
(Wireless broadband…)
Multiserver Monitor
OK
OK
OK
CLIENT
OK
NOT SUPPORTED
NOT SUPPORTED
SERVER
OK
OK
OK
NVVR Nethunter IP
recorder
OK
OK
OK
DVR
OK
Not recommended on
MPEG models
Not recommended on
MPEG models
NVR
OK
OK
OK
IP CAMERAS
OK
OK
OK
2.4.2 Uninstalling Nethunter components
Open the Windows® Control Panel “Add or Remove programs” option. Look for the Nethunter application group
and press the remove button.
This action will uninstall the Nethunter installed software and also will give you the choice to uninstall/remove
the database settings, including the recorded video. If you remove the database settings, the entire
configuration will be lost and after a new installation the system will need to be set up again from the beginning
(devices IP addresses, maps, browser structure, etc.).
When migrating versions (2.0 or greater), the installer will guide you through the migration process. Please, read
carefully the installation and migration steps for each version.
WARNING: MIGRATION FROM OLD VERSIONS
It is not possible to upgrade from previous Nethunter versions (1.x) to Nethunter 2.x, since the internal structures suffered from big changes, and
cameras should be discovered and added again to the main database.
To install Nethunter 2.2 in a PC with an existing NetHunterIP version, you should remove the software first. Remove also the database content
when you are asked (it is strongly recommended to take note of the old settings and devices, prior to removal)
All the components installed in the system must have the same version. Otherwise the system won’t work.