Technical information

Page 2 of 54
TSB−11−66−001
D Key removed from ignition (for KOS equipped vehicles, the ignition switch is in the LOCK position)
D Transmitter within approximately 150 feet of the vehicle
After the engine is started with the Remote Engine Start transmitter, it will stop if any of the following
conditions are detected:
D A door (or liftgate/trunk) is opened
D The accelerator pedal is pressed (except Endeavor, Galant and Eclipse models)
D The engine hood is opened.
D The key is inserted into the ignition switch (for KOS vehicles, the ignition switch is turned from the
LOCK position).
Remote Engine Start Kits and Transmitters
Model Affected Vehicles Part Number
2009.5 − 2012 Galant VIN 9E024751 and above MZ360271EX /
MZ360360EX *
2010 Eclipse/Eclipse Spyder From start of 2010MY production MZ360271EX /
MZ360360EX *
2009 − 2011 Endeavor From start of 2009MY production MZ360271EX /
MZ360360EX *
2009 Lancer From start of 2009MY production MZ360272EX
2010 − 2011 Lancer After June 1, 2008 production MZ360340EX
2010 − 2011 Lancer Sportback From start of 2010MY production MZ360340EX
2009 Outlander From start of 2009MY production MZ360272EX
2010 − 2012 Outlander From start of 2010MY production MZ360340EX
2011 − 2012 Outlander Sport From start of 2011MY production MZ360340EX
* MZ360360EX is a mid-year replacement of the MZ360271EX remote engine start kit.
Older transmitter
Part number MZ360300EX
− Provided with MZ360271EX and MZ360272EX kits
Newer transmitter
Part number MZ360361EX
− Provided with MZ360360EX and MZ360340EX kits
This may also be used as a replacement transmitter for the
MZ360271EX or MZ360272EX kit.
(See Replacement Transmitters below.)