Manualshelf

Technical information

ManualsBrandsMitsubishi ManualsAutomotiveMZ360360EX
11121314151617181920
Page 11 of 54
TSB−11−66−001
Setting Engine Idling Time
Once a vehicle is started by the remote engine start system, the engine, if left undisturbed, will con-
tinue to idle for a set time. This is referred to as “Engine Idling Time.” The factory default setting
is 10 minutes. It can be adjusted as shown below.
Part Number MZ360271EX/ MZ360272EX
Setting Idling Time
The idling time can be set to 5, 10, 20 or 30 minutes.
The initial setting at shipment is 10 minutes.
How to set the idling time
With the engine stopped, set the No. 2 and No. 3 pins of the DIP switch on the ECU to the
positions shown in the following table.
Always set the DIP switch pins other than the No. 2 and 3 pins to the OFF position.
CAUTION
!