Submittal
SPECIFICATIONS: MXZ-2C20NA2-U1, contd.
Operating Range:
Outdoor
Indoor Unit Type SEER EER HSPF
(IV)
Cooling 14 to 1)íWR&'%
Non-ducted (*2)
2.7 10.0 3.93
Heating
5 to 65° F (í15 to 18° C W%
Ducted (*2)
10.0 3 64
Multi-zone Indoor/Outdoor Combination Table
* Refer to indoor unit submittal.
Minimum oIWwo,ndoor Units must be connected to the M;=2&201$2
Minimum installed capacity cannot be less than 12%Wu/h
May connect to any style indoor unit or combination
MVZ CONNECTION RULES:
Only 1 M9=may be used on any system, two indoor units must be connected
When an M9=is connectedWotal connected capacity must be less than .
When an M9=is connectedno PSeries indoor units can be used (PC$3L$or3($'
Power supply
Connect the terminal blocN in
* $GLVFRQQHFWVZLWFKVKRXOGEHUHTXLUHG&KHFNWKHORFDOFRGH
8VHGRXEOHLQVXODWHGFRSSHUZLUHZLWK9LQVXODWLRQ
8VHFRSSHUFRQGXFWRUVRQO\
* Follow local electrical code.
Lead wire
POWER SUPPLY CABLE AND GROUND WIRE
8VHVROLGRUVWUDQGHGFRQGXFWRU0LQ$:*
8VHFRSSHUFRQGXFWRUVRQO\
* Follow local electrical code.
*URXQG
7HUPLQDOEORFN
$±&'
7HUPLQDOEORFN
'XQLWLVIRU&1$RQO\
Notes:
6SHFLILFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH
70LWVXELVKL(OHFWULF6DOHV&DQDGD,QF
3DJHRI
)RUP6%B0;=2&201$2-U1B906
COP @
47°F
NOTES:
Indoor - Outdoor Power Connection:
Connecting order
IROORZLQJRUGHU
A
ĺ
%
ĺ
C
ĺ
'
ĺ
P
'XQLWLVIRU&1$RQO\
7HUPLQDOEORFNIRU
indoor/outdoor unit
Connect wires to the matching numbers of terminals.
Be sure to attach each screw to its correspondent terminal
when securing the cord and/or the wire to the terminal block.
$±&'
7HUPLQDOEORFN
LQ
(15 mm
LQ
PP
*URXQGLQJ
terminal **
208/230 VAC
1 phase 60 Hz
Power supply
9$&
SKDVHZLUHV+]
'LVFRQQHFW
switch *
*URXQGLQJ
terminal **
*URXQGLQJ
terminal **
)RUIXWXUHVHUYLFLQJJLYHH[WUDOHQJWKWRWKHFRQQHFWLQJZLUHV
7HUPLQDOEORFN
287'22581,7
System can operate with one,ndoor Unit or both indoor units on.
,nIormation proYided at /9
Remark:
CONNECTING WIRES AND CONNECTING GROUND WIRE
Use solid conductor Min AW*14 or stranded conductor Min
$:*
** 8VHDULQJWRQJXHWHUPLQDOLQRUGHUWRFRQQHFWDJURXQGZLUHWRWHUPLQDO
,1'22581,7
7HUPLQDOEORFN
WARNING:
Use the indoor/outdoor unit connecting wire that meets the Stand-
ards to connect the indoor and outdoor units and ¿x the wire to
the terminal block securely so that no external force is conveyed
to the connecting section of the terminal block. An incomplete
connection
or ¿xing of the wire could result in a ¿re.
- MXZ Compatibility Chart – available on MESCA Tech Info Centre M-Series submittal page
Should this document be altered or changed without MESCA’s permission, it becomes null and void. MESCA assumes no responsibility for any consequences in such cases.