Specifications

AUTOMATIC TRANSMISSION -
Troubleshooting
23-8
No. State prior to test
and operation
Test and operation Judgement value Check item Diag-
nosis
code
No.
Inspection
procedure page
if there is an
abnormality
6 Selector lever
position: N
(Carry out on a
Selector lever
position and
vehicle speed
Data list No. 63
(2) 1st, (4) 3rd, (3)
2nd, (5) 4th
Shift condition - -
flat and straight
road.)
(1) Idling in
L range
(Vehicle
stopped)
(2) Driving at
Data list No. 31
(2) 0 %, (4) 100 %,
(3) 100 %, (5) 100
%
Low and reverse
solenoid valve
31 Low and reverse
solenoid valve
system (23-18)
constant speed
of
10 km/h in
L position
Data list No. 32
(2) 0 %, (4) 0 %,
(3) 0 %, (5) 100 %
Underdrive
solenoid valve
32 Underdrive
solenoid valve
system (23-18)
(3) Driving at
constant speed
of
30 km/h in
Data list No. 33
(2)100 %, (4) 100
%, (3) 0 %, (5) 0 %
Second
solenoid valve
33 Second solenoid
valve system
(23-18)
2 position
(4) Driving at
50 km/h in
3 position with
accelerator fully
Data list No. 34
(2) 100 %, (4) 0 %,
(3) 100 %, (5) 0 %
Overdrive
solenoid valve
34 Overdrive
solenoid valve
system (23-18)
closed
(5) Driving at
constant speed
of
Data list No. 29
(1) 0 km/h
(4) 50 km/h
Vehicle speed
sensor
- Vehicle speed
sensor system
(23-38)
50 km/h in
D position
(Each
condition
Data list No. 22
(4) 1,800 - 2,100
rpm
Input shaft
speed sensor
22 Input shaft speed
sensor system
(23-16)
should be
maintained for
10 seconds or
more.)
Data list No. 23
(4) 1,800 - 2,100
rpm
Output shaft
speed sensor
23 Output shaft
speed sensor
system (23-17)
7 Selector lever
position: 3
(Carry out on a
flat and straight
road.)
Selector lever
position and
vehicle speed
(1) Release the ac-
celerator pedal
Data list No. 36
(1) 0 %
(2) Approx. 70 - 90
%
Damper clutch
control solenoid
valve
36
52
Damper clutch
control solenoid
valve system
(23-19)
fully while driv-
ing at 50 km/h
in 3rd gear.
(2) Driving at
constant speed
of 50 km/h in
3rd gear.
Data list No. 52
(1) Approx.
100 - 300 rpm
(2) Approx.
0 - 10 rpm