Specifications

AUTOMATIC TRANSMISSION -
Troubleshooting
23-7
No. State prior to test
and operation
Test and operation Judgement value Check item Diag-
nosis
code
No.
Inspection
procedure page
if there is an
abnormality
5 Engine: Idling
Selector lever
position: N
Brake pedal
(Retest)
(1) Depressed
(2) Released
Data list No. 26
(1) ON
(2) OFF
Stop lamp
switch
26 Stop lamp switch
system (23-18)
A/C switch
(1) ON
(2) OFF
Data list No. 65
(1) ON
(2) OFF
Dual pressure
switch
- Dual pressure
switch system
(23-37)
Accelerator pedal
(1) Released
(2) Half depressed
Data list No. 64
(1) ON
(2) OFF
Idle position
switch
- Idle position
switch system
(23-37)
Data list No. 21
(1) 550 - 850 rpm
Gradually rises
from (1)
Crank angle
sensor
21 Crank angle
sensor system
(23-16)
Data list No. 57
(2) Data changes
Communication
with engine-
ECU
<V ehicles
without TCL>
Communication
with TCL-ECU
<V ehicles with
TCL>
51 Serial
communication
system (23-25)
Selector lever
position
(1) N ® D
Should be no
abnormal shifting
shocks
Malfunction
when starting
- Engine stalling
during shifting
(23-30)
(1) N ® D
(2) N ® R
Time lag should be
within 2 seconds
- Shocks when
changing from N
to D and large
time lag (23-30)
- Shocks when
changing from N
to R and large
time lag (23-31)
- Shocks when
changing from N
to D,N to R and
large time lag
(23-32)
Driving
impossible
- Does not move
forward (23-28)
- Does not
reverse (23-29)
- Does not move
(forward or
reverse) (23-29)