Specifications

AUTOMATIC TRANSMISSION -
Transmission Assembly
23-69
A
E
"
ENGINE AND TRANSMISSION ASSEMBLY
SUPPORTING
Set the special tool to the vehicle to support the engine and
transmission assembly.
A
F
"
TRANSMISSION ASSEMBLY LOWER PART
COUPLING BOLTS/TRANSMISSION ASSEMBLY
REMOVAL
1. Support the transmission assembly by using a
transmission jack.
2. Remove the drive plate bolts while turning the crank shaft.
3. Press in the torque converter to the transmission side
so that the torque converter does not remain on the engine
side.
4. Remove th e transmission assembly lower bolts and lower
the transmission assembly.
INSTALLATION SERVICE POINTS
"
A
A
TRANSMISSION ASSEMBLY INSTALLATION
After securely inserting the torque converter into the
transmission side so that the value shown in the illustration
becomes the reference value, install the transmission
assembly to the engine.
Reference value (A): Approx. 12.2 mm
"
B
A
TRANSMISSION MOUNT STOPPER
INSTALLATION
Install the transmission mount stopper so that the arrow points
as shown in the illustration.
MZ203827
MB991453
Drive plate bolts
A
Transmis-
sion mount
stopper
Engine side
Arrow
Transmission
mount bracket