Specifications

AUTOMATIC TRANSMISSION -
Transmission Assembly
23-66
TRANSMISSION ASSEMBLY
23100570274
REMOVAL AND INSTALLATION
Pre-removal Operation
D Carry out the essential service for the
troubleshooting (Refer to P.23-46.)
D Transmission Fluid Draining (Refer to P.23-47.)
D Under Cover Removal
D Battery and Battery Tray Removal
D Air Cleaner Assembly Removal
Post-installation Operation
D Air Cleaner Assembly Installation
D Battery and Battery Tray Installation
D Under Cover Installation
D Transmission Fluid Supplying <Supplying should
be done before starting the engine>
(Refer to P.23-47.)
D Check the Dust Cover for Cracks or Damage by
Pushing it with Finger.
D Selector Lever Operation Check
D Speedometer Operation Check
D Wheel Alignment Adjustment
(Refer to GROUP 33A - On-vehicle Service.)
88 Nm*
1
98 - 118 Nm*
1
12 Nm
103 Nm
44 Nm
81 Nm
67 - 78 Nm
24 - 33 Nm
81 Nm
98 - 118 Nm
88 Nm
30 Nm
30 Nm
10 - 12 Nm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
17
Removal steps
1. Transmission control cable connec-
tion
2. Transmission fluid cooler hoses
connection
3. Bolt
4. Input shaft speed sensor connector
5. Output shaft speed sensor
connector
6. Inhibitor switch connector
7. A/T control solenoid valve assem-
bly connector
8. Vehicle speed sensor connector
9. Starter motor <6A1>
A
A
"
10. Tie rod end connection
11. Stabilizer link connection
12. Damper fork
13. No. 2 stay
14. Lateral lower arm connection
A
B
"
15. No. 3 stay
16. Compression lower arm connection
A
C
"
17. Drive shaft
Caution
*1: Indicates parts which should be temporarily
tightened, and then fully tightened with the
vehicle on the ground in the unladen condition.