Owner`s manual

91
No.
Message/Symptom Cause Remedy
1. Connect the unit to the PC (for power activation)
while pressing the V.C.I. “Esc” key.
2. Verify that the V.C.I. screen display indicates
“Maintenance Mode”.
3. In order to install the V.C.I. basic application, using
the automatic version upgrade feature, start the PC
M.U.T.-III diagnostic application and attempt
diagnosis. (refer to 3-3-1)
4. As “Setup V.C.I.” dialog box appears on PC screen
during the diagnosis, press button.
5. When “Update” dialog box disappears on PC
screen, the install is completed.
4
The screen “ECU
Reprogramming”
appears as soon as
the V.C.I. power is
activated.
The V.C.I. basic
application has not
been installed.
6. If, once the application has been downloaded and
the V.C.I. power has been reactivated, the “Main
Menu” or “PC Communication” display does not
appear, request inspection.
1. Press the V.C.I. “Enter” key.
5
The screen
“Drive Recorder [1]
Record error ”
appears during
recording the Drive
recorder with V.C.I.
alone.
Communication error
2. Verify that the V.C.I. screen display indicates “Drive
Recorder Continue? “, press the “Enter” key or wait
10seconds to start recording again.
Individual Troubleshooting Procedures