Owner`s manual

88
(2) Put the pressure gauge on the fuel pipeline.
Press Fuel Pressure Measurement on the menu
screen of 11-1-1(1).
The selection screen of pressure gauge appears. Select a
pressure gauge and press button.
(3) Entering the Calibration value
Enter the calibration volt which you measured in (1), and
press button.
(4) Measuring Fuel Pressure
The measured value is displayed on the graph.
11-2-2. Measuring Voltage and Resistance
(1) Press Voltmeter or Ohmmeter on the menu
screen of 11-1-1(1).
The voltage or resistance value comes from the test leads
connected to the trigger terminal and displayed on the PC
screen.
-For details on how to connect the measurement probe,
and details for measuring using V.C.I. alone, refer to 2-2-3.
-Prior to executing the measurement process, calibrate
the instrument to 0 using button.
Note:
-DC voltage can be measured in the range of 0-±40V.
-Resistance can be measured in the range of 0-100KΩ.
Measurement Functions