Owner`s manual

81
(6) Data search
Searching the target reprogramming data.
(7) Data check
-The appropriate reprogramming data is indicated.
-Press button to go to next.
(8) Reprogramming data check
-Check and press button.
-If you select other repro. data, press button to back.
(9) Reprogramming
Reprogramming on board ECU starts.
(10) Reprogramming completed
-Reprogramming is completed properly.
-Reprogrammed ECU Part No. and S/W Part No. are
indicated.
-Press button, and turn IG switch OFF.
< Unnecessary reprogramming >
・ Appropriate reprogramming data
is not released.
・ Onboard ECU Part No. and S/W
Part No. are indicated.
< Complete reprogramming >
・ Onboard ECU has reprogrammed.
・ Onboard ECU Part No. and S/W
Part No. are indicated.
Target data
found
Unnecessary
reprogramming
Complete
reprogramming
ECU Reprogramming