Owner`s manual

79
(d). Search
To search the reprogramming data by inputting ECU Part No.,
ROM-ID, or Data No.
(1) Press Search button on the function menu, then the left
screen appears.
Input search key info in the input column, then press .
Note:
• To input, 2 ways can be taken.
-By PC keyboard
-By virtual keyboard --press
• Some info need to be a combination with the other info for
data search
- Current ECU P/N & ROM-ID need to be together.
- Data No. needs no other info.
(2) Results
Select appropriate data with scrolling the list using
buttons and press to start transferring
the data into V.C.I memory.
--10 lines scrolling
-After completing the data transfer, ECU reprogramming will
start sequentially. (Refer to 10-5-3.)
Note:
Press
OK button when message window of device removal
warning comes out at start and end of data transfer.
10-5-3. Reprogramming ECU (V.C.I.  vehicle ECU)
Operate with buttons (in the lower right
corner of the screen) according to directions of screen
display.
The same operation as 10-4-4. need to be performed on PC
screen.
ECU Reprogramming