Owner`s manual

(c). Reprogramming Data Selection

To select the reprogramming data from arbitrary directories.

(1) Press Reprogramming Data Selection button on the

function menu, then the left screen appears.

--to select arbitrary drive and directory  (2)

On this screen, select an appropriate data file and press

to start transferring the data into V.C.I memory.

Note:

-The displayed data as default is in the folder shown below.

C:¥Program Files¥MUT3¥RPGDATA

This directory is the default reprogramming data pool of

M.U.T.-III, referred from 10-4-1, 10-5-2(a),(b),(d).

-After completing the data transfer, ECU reprogramming will

start sequentially. (Refer to 10-5-3.)

(2) Data selection

Select a drive on the left chart, and the directories in the

drive are displayed on the right chart.

-To move to a lower directory, select appropriate row on the

right chart and press button.

-To move to an upper directory, select row on the right

chart and press button.

Select appropriate directory name row on the right chart,

and press button to return to (1) and list the files

contained in the directory.

Drive

selection

side