Owner`s manual

76
10-5. Reprogramming Operation ( V.C.I. - PC connected )
10-5-1. Search method Selection
(1) Press Special function button on STV Top Menu.
(2) Press ECU Reprogramming button.
(3) Select an appropriate button.
Automatic Reprogramming (K-line) --to 10-5-2(a)
- Automatically searches appropriate Reprogramming
data stored in PC.
Database File Display --to 10-5-2(b)
- Shows the list of Reprogramming data stored in PC.
Reprogramming Data Selection --to 10-5-2(c)
- Allows to select Reprogramming data in arbitrary drive
and directories.
Search --to 10-5-2(d)
- Allows to search the target data by ECU No., ROM-ID, etc.
 Connect PC and V.C.I., and prepare following steps.
1. Connect M.U.T.-III Main Harness B or A to V.C.I. securely.
2. After verifying the ignition switch position at LOCK (OFF),
connect the M.U.T.-III Main harness B or A to the
vehicle’s data-link-connector.
3. Turn Ignition switch on, and turn V.C.I. main switch on.
(Do not start engine)
ECU Reprogramming