Owner`s manual

72
10-4-3. Data Retrieval (Memory card  V.C.I.)
(a). Automatic Data Retrieval
(b). Select and Load Data
(c). (Special case)
(a). Automatic Data Retrieval
(1) Select “Automatic RPG” in main menu and press Enter key.
Version No.of data base file appears.
By waiting 10sec or pressing Enter key, V.C.I starts
communicating with ECU and retrieves reprogramming
data file with the ECU’s parts No.and ROM-ID.
（2） The appropriate reprogramming data file No.is displayed.
Pressing Enter key starts transferring the data file into V.C.I
built-in-memory.
Remark:
• To search another data, press Esc key. If another
appropriate reprogramming data exist, it will be displayed.
• The message bellows are displayed depends on ECU
parts No, ROM-ID and condition of ECU. Press Enter Key
to move back to Main menu.
(a) “No update data in PC card”
This message appears if no pertinent reprogramming
data exists. No data will be transferred.
(b) “ECU at current level of VCI”
This message appears
if the ECU has been already
reprogrammed. No data will be transferred.
(3) Progress is displayed on the monitor.
* mark is increased by steps.
(4) After completing data transfer, ECU reprogramming starts
sequentially.
For next steps, refer to 10-4-4.
VN02031.rpg
Rewrite ECU?
No update data
in PC card
ECU at current
level of VCI
Loading****
<Main Menu>
1 Automatic RPG
<Automatic RPG>
D/B ver. N03041
ECU
Reprogramming
ECU Reprogramming