Owner`s manual

53
6-3-2. Extraction and Search of the recorded data
Recorded data can be extracted or retrieved for display on
predetermined conditions.
<Extraction: Only matching data will be displayed>
<Retrieval: Matching data will be displayed with *(asterisk)>
Time range, threshold of item etc. can be set as condition of
extraction or retrieval.
(1) Condition setting for data extraction
Extraction condition setting screen shown on the left will be
displayed after pressing button on text/graph display
screen.
• Select an item and edit its condition in Condition editing
table appearing at the bottom of the screen.
Condition editing table
“UP/DOWN”: Threshold or higher / Threshold or lower
“Level/Edge”:
Matching data / Data as of the time when it turns
to be matching from not matching
“AND/OR”: -
Data matching with both of this condition and the
other one upper row on Extraction Setting table/
-Data matching with either of this condition or the
other one upper row on Extraction Setting table
• Then, press button to add the condition onto Extraction
Setting table.
(Extraction Setting table can include up to 8 conditions.)
• Press button to display extracted data only in
text/graph.
--Set Time extraction condition.
--Delete selected extraction condition data.
Time extraction condition setting
After pressing button, time extraction condition setting
screen shown on the left will be displayed. Set time range on
this screen and press button to display extracted data
only.
--Return to data extraction condition setting screen.
Drive Recorder <Analyze Data>