Owner`s manual

(12) The contents check of setting (2/3)

The list of set recording items appears.

--To check threshold trigger conditions (if selected)

--To check recording setting

Pressing starts recording – go to (14)

Note:

When “Graph” is selected in (8), the background color of the

name column of the item, which is to be displayed in graph

during the recording, changes into yellow.

(13) The contents check of setting (3/3) (Only if selected in (7))

The list of threshold trigger conditions appears.

--To check recording setting

--To check set items

Pressing starts recording – go to (14)

(14) Recording Data

[Graph]

It saves at the file, expressing data as the set-up record

conditions. The four items chosen on (9) are indicated by

graph as the left screen (a).

[Text]

When “Text” was chosen on (8), and a drive recorder is set

up, it saves at a file, acquiring and expressing data as the

set-up record conditions. (see the left screen (b))

--Data record end --to (15)

When Trigger is not generated during data record, let the

point at the time of a record start be time 0:00.0.

--Manual Trigger occurs

However, when Diagnosis Code Trigger or Threshold Trigger

are chosen as trigger conditions, suppose that it is invalid.

Note:

-Record is continued until record end button is pushed,

even if trigger occurs.

-The availability of the hard disk of the PC is checked after

record screen display and before record start. When the

availability is 100MB or less, a message is displayed and

record is stopped.

-When the number of record data reaches to 20000 points,

a message is displayed and record is completed.

Drive Recorder <Record on PC >

(a). Recording screen [Graph]

(b). Recording screen [Text]