Owner`s manual

(8) PC Drive recorder setup

• Please confirm the contents of record setting, and set up

the sampling interval with the cursor or button.

• Select a display format for recording (either Graph or Text)

having a circle marked “ ”.

--Displaying item Select (‘Graph’ only)--to (9)

--OK -- to (10)

Note:

-The sampling interval time indicates the data-recording

interval for one item. A setting of “0 sec” (fastest) results in

the fastest sampling interval.

-Recordable time computes the number of the maximum

record points as 20000 points, and is displayed. This is the

prediction time on calculation and differs from actually

recordable time.

-The configuration of the displayed file names is DR+ Year

MonthDay + Time (military time including seconds), using

the PC time. <DR: The file saved by the drive recorder>

-The setting value of a sampling interval can be chosen

from 0sec(fastest)/1sec/10sec/1min.

(9) Graph display item selection

Select the items you wish to display on the graph.

Selected 4items are displayed during the recording.

The items not selected are not displayed on graph but the

data are recorded.

-- OK -- to (8)

(10) Enter the record information (memo).

Enter the reference information, such as the vehicle model

and diagnosed system name.

--OK -- to (11)

Note:

Because the unit is linked with the PC keyboard, you can

enter the information either directly using the PC keyboard

or by using the screen keyboard.

(11) The contents check of setting (1/3)

The list of recording settings appears.

--To check set items

--To check threshold trigger conditions (if selected)

Pressing starts recording – go to (14)

Drive Recorder <Record on PC >