Owner`s manual

40
6-1-2. Recording on PC with displaying data
This section describes the operation for saving the data at a
file with displaying it as the set up record conditions on PC.
(1) System Select
Select a system for which the drive recorder is to be used
on the System Selection screen.
(For instruction on how to select a system, refer to 3-3-1
)
- The following explanation describes how to set the drive
recorder settings of the MFI system as a representative
example.
(2) Selection of function.
Press
Drive Recorder button.
(3) Press
Record button on the Drive Recorder function
menu.
Note:
Data display -- Displays the recorded data. (Refer to 6-3)
or edit the data (Refer to 6-2-2)
Record (Read Setting Conditions) -- Allows you to
restore past recording conditions so that you can execute
recording under the same conditions as those used with
previously recorded data files. (Refer to 6-1-3)
Data Storing -- The data saved in a removable disk can
be stored into the PC. (Refer to 6-2-2 (7))
Drive Recorder <Record on PC >