Owner`s manual

(13) The contents check of setting (3/3) (Only if selected in (7))

The list of Threshold conditions appears.

--To check recording setting

--To check set items

Press button transmits the settings to the V.C.I.-- To (14)

(14) Transmit Confirmation

By pressing button on screen (11)/(12)/(13), the record

settings are transmitted to V.C.I..

Press button.

(15) Once the settings have been transmitted from the PC to the

V.C.I., a message appears indicating that the settings have

been transmitted. Please wait a second.

(16) Press button.

Note:

If you wish to start recording immediately, disconnect the

USB cable while leaving the V.C.I. switch ON.

(Disconnecting the USB cable starts to record the data on

V.C.I.) -- to (17)

If you wish to just set the settings and later start recording,

turn the V.C.I. switch OFF and then disconnect the USB

cable.

(17) Recording

When you record with a manual trigger, connect the trigger

harness to the V.C.I. trigger terminal as necessary.

Note:

-When the USB cable is connected, the V.C.I. communicates

with the PC, thereby prohibiting drive recorder startup. Do not

connect the USB cable.

Drive Recorder <Record by V.C.I. alone>