Owner`s manual

35
(4) Item Select
• Select an item you wish to record and apply the selection
using button.
--Inserts the item selected in “Available items list” into
the selected area of “Selected items list”.
--Inserts the item selected in “Selected items list” into
the lowermost area of “Available items list”.
--Inserts all the items from “Selected items list” into the
lowermost areas of “Available item list”.
--Changes the order in which the items are displayed in
“Selected items list” and “Available items list”, in the
sequence of default setting.
• When complete the selection, press button.
Note:
-A maximum of 16 items can be recorded.
(5) Trigger method / Recording style Select
• Select trigger method and put mark(s).
(Multiple selection)
• Put the mark on “
V.C.I. Drive recorder”.
• When complete the selection, press button.
“Manual Trigger” --Allows you to set the trigger manually.
--to (8)
“Diagnosis Code Trigger” --Applies the trigger when the
specified diagnostic code is generated. -- to (6)
“Threshold Trigger”--Applies the trigger when the condition
meets the set threshold. – to (7)
(6) When “Diagnosis Code Trigger” is selected in (5), the left
screen appears.
Select an item to be the trigger, and press button.
--to (8). (If Threshold Trigger is selected as well, go to (7))
Drive Recorder <Record by V.C.I. alone>