Owner`s manual

4-2-2. Details of Data List Screen

(1) Displaying Item Selection

Select a group of the data to be displayed,

and press button.

Item Select

By default, none of the items are selected.

Select an item that you wish to display, and apply the

selection using or buttons.

When the selection has completed, press button.

Inserts all the items from “Available item list” into the

selection areas of “Selected item list.”

--Inserts the item selected in “Available item list” into the

selection area of “Selected item list”.

--Inserts the item selected in “Selected item list” into the

lowermost area of “Available item list”.

--Inserts all the items from “Selected item list” into the

lowermost areas of “Available item list.”

--Changes the order in which the items are displayed in

the “Selected item list” and the “Available item list,” in

the sequence of default setting.

Note:

-When there is no selected item, all items are displayed.

-The item number of service data OBD basic items appears

green.

(2) Record Data

1. Graph data is paused by pressing button, and the

data can be saved on the PC automatically.

-- OK -- to 2

--Cancel (not save the data and return to the pause

screen. Pressing button starts data list again.)

2. The data has saved.

The file name of the recorded data is set as

”SD

+ YearMonthDay + Time (military time including

seconds)”, using the PC time as standard.

-- OK

Note:

For details on how to view the saved data, refer to 6-2-2(3).

Data List