Owner`s manual

13
3-3. Basic Flow to Start Diagnosis
3-3-1. Basic Flow of System Select Diagnosis
(1) STV Top Menu
Press
System Select button on the STV Top Menu screen.
(2) System Selection Screen
Select either one of “Up to 2005MY” or “From 2006MY” for
the Model Year of the vehicle you are diagnosing.
Then follow the each operation below.
 When selecting “Up to 2005 MY”
1. Select a system on the System List
(*a), and press .
2. If the system has a loading option, the Loading Option
Setup list
(*b) will be displayed. Then, select an item
having a box checked ( ) and press
.
 When selecting “From 2006 MY”
1. Confirm the contents of the Vehicle Information list
(*c).
-When the contents are not describing the vehicle, press
to correct the information. (For details, refer to 3-3-2
)
-When the contents are describing the vehicle, press .
2. Select a system on the System List
(*a), and if the Loading
Option Setup list
(*b) is displayed, select an item having a
box checked ( ). Then press
.
Note:
-If the engine is OBD, the check code appears.
-When you select “MFI”, “ELC-A/T” or “CRUISE CONTROL”
system, a selection screen appears asking whether
MITSUBISHI or DaimlerChrysler. Select a button that the
engine belongs to.
Basic Flow to Start Diagnosis
*a
*b
*c
*a