Service Manual

OPERATING PROCEDURE PHOTOS
5. Removing the expansion valve
(1) Remove the top panel, and the service panel (Refer to 1).
(2) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(Gas recovery is not required if the unit is pumped down.)
(3) Remove the LEV coils.
(4) Detach the brazed parts of the expansion valves and
pipes.
90
Photo 9
Suction pipe
brazed part
Compressor nuts
LEV coils
Expansion
valves
Expansion
valves
Discharge pipe
brazed part
OBH702C