Service manual
#
1
After the system restarts by the remote controller, the system operates with the previous set temp. regardless of the
initial set temp.
E2
By room temperature compensation of 4 deg, room temperature of a living space is 75°F.
(5)
1
FEEL CONTROL buttons
In
"I
FEEL CONTROL" mode,
set
temp. is decided by the microprocessor based on the room temp. In addition, set temp.
is controlid by
I
FEEL CONrROL buttons when you feel too cool or too warm, and when you feel comfortable the
&
button
foces
the
comfortable temp.
When the
I
FEEL CONTROL bunon
is
pressed,
I
FEEL MONITOR lamp on the indoor unit pulsates for a second with
beeps.
Variable control
1W
COOL
TOO
WARM
When the
0
or
0
button is pressed, the set temp. is changed based on the room temp. As the set temp. range
is variable, this is called "Variable control". The variable control operates only in
"I
FEEL CONTROL" mode.
In
DRY
mode of
"I
FEEL CONTROL". the
set
temp. range is fixed
+
2
deg ("F).
(4) The initial set temp. is decided by the initial room temp. within
2
min. after starting-up the system.
iej
--To raise the set temp
2
deg.
-
5
deg. (.F)
OKAY
..+To fix and memorize the comfortable present temp.
0
Initial set temp.
I
Mode
Too
WARM...~o lower the set temp.
2
deg.
-
5
deg. ("F)
0
initial Room Temp.
Over shoot control
when1=button (or'= button, when heating) is pressed one or two
I
FEEL MONITOR lamps light, the indoor unit
operates to get lower (or higher, when heating) temp. than the set temp. temporarily
(60
sec.) by the microprocessor
control. This is called "Over shoot control".
when1= button is pressed during COOL mode of
"I
FEEL CONTROL", the tempera6tre change is as follows.
Room temp.----
6
deg.
('F)
Set
temp.
MSH-09,12,15
When
100
COO'
-
button is pressed during HEAT mode of
"I
FEEL CONTROL" the temperature change is as follows.
Set
temp.
6
deg.
Set
temp.
range
MAX.
5'F
Room
temp.
The over shoot control does not operate when
button is pressed during COOL mode of
"I
FEEL CONTROL" an4
1W
WARM
button is pressed during HEAT mode of
"I
FEEL CONTROL".
20