Instruction manual

90
Model Setting
4.1 Model Setting
Set inverter model in "Model Setting" window.
There are the following ways to display "Model Setting" window.
(1) Select [M
odel Setting] in [Tool] menu.
(2) Double-click a station number in "System Setting" of System View.
No. Name Function and description
A
St. No. Set the inverter station number from 0 to 31.
B
Comment A field for comments.
C
Inverter Select the connected inverter model.
D
Capacity Select the connected inverter capacity.
E
Option Connector 1 to 3,
Ter m i n a l B l o c k 3
Select the options connected to the option connectors. (Option Connector 1 to 3 are available for FR-
A700, A701 series)
F
OK Applies the Model Setting into the system, and closes the "Model Setting" window.
G
Cancel Returns to the Main frame with the invalid setting.
H
Apply Applies the Model Setting into the system.
I
Help Displays Help window. (Refer to page 160)
REMARKS
• Inverter model will change if capacity or option setting field is changed, therefore current value, setting value and comment in
"Parameter List" are also cleared. If you want to reuse the current value, setting value and comment, export the "Parameter
List" data beforehand, and then change the model setting. After adjusting model setting, import the exported data from the
"Parameter List" window to reuse the current setting, setting value and comment.
• Use Option Connector 2 on the Model Setting window to select a network option connected to an F700-NA or EC, which is
equipped with only one option connector. No network option is selectable in Option connector 1.
The connected network option will be automatically set to Option Connector 2 when the Automatic Recognition is performed for
an F700-NA or EC, which is equipped with only one option connector. The connected network option will be also automatically
set in Option Connector 2 when a MEL file set to an F700-NA or EC is read.
IF G H
D
A
B
C
E