Instruction manual

72
Troubleshooting
3.3.1 Status display
Status Display window appears when Troubleshooting is started. (Note that Cause Estimate window (Refer to page 73) appears
instead of Status Display for Troubleshooting which does not require communication with the inverter.)
The current inverter state and I/O terminal (signal) is shown. Condition setting field of trouble occurrence is provided
according to Troubleshooting items. Click after selecting conditions.
No. Name Function and Description
A
Setting Procedure Displays the current, previous, and next setting in Troubleshooting.
B
Condition setting field Select a condition of trouble occurrence.
C
Stop
Stops monitoring and holds the status. Use when trouble occurs at a certain condition. Click at the
trouble occurrence and stop the monitor, to narrow down the causes.
D
Start Click to restart monitoring.
E
State Displays the inverter state and I/O terminal (signal).
F
Help Displays Help window. (Refer to page 160)
G
Cancel Closes the window with the invalid setting.
H
Next> Display Cause Estimate window. (Refer to page 73)
GHF
E
A
B
C
D