Instruction manual

69
Details of Setting Wizard
3
SETTING WIZARD
3.2.4 Tuning (FR-A700, A701, D700, E700(SC)(NC), F700PJ only)
Select "Tuning" in the "Setting Wizard"(Refer to page 105) in System View to start "Tuning" wizard. Tuning is performed after
necessary parameter setting. Tuning is performed during the ONLINE mode only.
(1) Setting flow
(2) Window explanation of Tuning
No. Name Function and Description
A
Tuning monitor Displays progress of tuning.
B
Reverse rotation Sends reverse rotation command to the inverter to start tuning.
C
Forward rotation Sends forward rotation command to the inverter to start tuning.
D
Stop Sends stop command to the inverter to stop tuning.
Select Tuning method.
Input motor information.
The parameters requiring setting for Tuning are displayed
according to the input information. Click to write
parameter settings.
Click to save the parameter setting of Tuning, for
performing actual Tuning later.
Select the control method.
Start Tuning. Click or to start Tuning.
Motor Setting
Starting "Analog Input Terminal Calibration" wizard
Finish
Tuning
Parameter List
Tuning Method
Control Method
A
CBD