Instruction manual

64
Overview of Setting Wizard
3.1.2 Parameter list
Click after the required item in each setting is filled in, and then the parameter setting is configured based on the
inputted setting. Configured parameter setting is displayed in Parameter List after every setting is finished.
To write the parameter setting to the inverter, write from the Parameter List in the Main frame. (Refer to page 106)
No. Name Function and description
A
Selected station number Shows the selected station number, inverter model and a comment.
B
Setting procedure Shows the past settings in Setting Wizard.
C
Parameter setting field Shows the parameter setting configured in Setting Wizard in the list.
D
Help Displays Help window. (Refer to page 160)
E
Cancel Closes the window with the invalid setting.
F
<Back Returns to the previous setting window.
G
Finish
Closes Setting Wizard with the valid setting.
Configured setting by Setting Wizard is applied to Parameter List.
(Parameter writing to the inverter is not performed.)
B
A
EGFD
C