Instruction manual

56
Easy Setup
2.2.8 Motor setting
Adjust the motor settings of the inverter. Click after inputting the motor information.
* Some models have fixed settings.
• Changing parameter
Parameters related to motor setting. (Refer to the Inverter Instruction Manual for details of the parameters.)
No. Name Function and description
A
Applied Motor
Select a type of motor. Selectable motor types are different according to the control method
selected in "Control Method" window (or Pr. 71 setting).*
B
Motor information
Fill in the motor information. Required motor information to fill in is different according to the
control method setting selected in "Control Method" window.
C
Unit (monitor, frequency setting)
Change the Hz unit in the monitor display and the frequency setting to rpm when necessary. This
section is enabled when "IPM motor control" or "PM sensorless vector control" has been selected
in the "Control Method" window.
(According to the mounted communication option, the unit for monitor display and frequency
setting may always be Hz.)
D
Next> Proceeds to "Start Command and Frequency (Speed) Setting Method" (Refer to page 58).
E
<Back Returns to "Control Method" (Refer to page 55).
F
Cancel Closes Easy Setup with the invalid setting.
G
Help Displays Help window. (Refer to page 160)
Parameter
Number
Name
9 Electronic thermal O/L relay
71 Applied motor
80 Motor capacity
81 Number of motor poles
83 Rated motor voltage
84 Rated motor frequency
359 Encoder rotation direction
369 Number of encoder pulses
B
A
C
"Unit (monitor, frequency setting)" setting screen
(Example for IPM motor control)
DEFG