Instruction manual

54
Easy Setup
2.2.6 Inverter selection
Click to register the system setting, and then parameter setting becomes available.
Choose an inverter (station number) for parameter setting, and click . After parameter setting is finished, the window
returns to "Inverter Selection" again.
Click to close Easy Setup, and proceeds to the Main frame window.
No. Name Function and description
A
Register System Setting Register the system setting configured in Easy Setting.
B
Inverter selecting field
Shows the inverter reflected into the system setting. Choose a station number for parameter setting,
and click .
A check mark is displayed on the station number if the parameter setting has been already configured.
(Click to register the system setting first, and the field becomes available.)
C
Finish Click to close Easy Setup, and proceeds to the Main frame window.
D
Next> Proceeds to "Control Method" (Refer to page 55).
E
<Back
Returns to "Model Setting" (Refer to page 53), "Automatic Detection" (Refer to page 52), or "Parameter
List" (Refer to page 59).
F
Cancel Closes Easy Setup with the invalid setting.
G
Help Displays Help window. (Refer to page 160)
A
B
E DFG C